HCL Workload Automation, Version 9.4

AWSBIB - Scheduling language parser messages

This section lists scheduling language parser error and warning messages that might be issued.

The message component code is BIB.

AWSBIB001E   There is a syntax error. The time specified in the at, until, or deadline time definitions must be between 0000 and 2359 (hhmm).

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB002E   There is a syntax error. The job limit must be between 0 and 1024.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB003W   The resource number must be between 1 and 32.

AWSBIB004W   There is a syntax error. Priority must be a numeric value from 0 to 99, hi (= 100), or go (= 101).

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB006E   There is a syntax error. The job stream name is not syntactically valid. The name must start with a letter, and can contain alphanumeric characters, dashes, and underscores. It can contain up to 16 bytes.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB007E   There is a syntax error. The job name is not syntactically valid. The name must start with a letter, and can contain alphanumeric characters, dashes and underscores. It can contain up to 40 bytes.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB008E   There is a syntax error. The resource name is not syntactically valid. The name must start with a letter, and can contain alphanumeric characters, dashes and underscores. It can contain up to 8 bytes.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB009E   There is a syntax error. The prompt name is not syntactically valid. The name must start with a letter, and can contain alphanumeric characters, dashes and underscores. It can contain up to 8 bytes.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB010E   There is a syntax error. The calendar name is not syntactically valid. The name must start with a letter, and can contain alphanumeric characters, dashes and underscores. It can contain up to 8 bytes.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB011E   There is a syntax error. The recovery job name is not syntactically valid. The name must start with a letter, and can contain alphanumeric characters, dashes and underscores. It can contain up to 40 bytes.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB012E   Recovery job lockword is not syntactically valid.

AWSBIB013E   Recovery job password is not syntactically valid.

AWSBIB014E   There is a syntax error in the job statement in the job stream definition. The required streamlogon <username> argument has not been supplied.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB015E   Invalid logon for MPE job

AWSBIB016E   There is a syntax error in the job statement in the job stream definition. The streamlogon user name is not syntactically valid. The name must be no more than 47 bytes, and cannot contain periods or other special characters.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB017E   Group name is not syntactically valid.

AWSBIB018E   Account name is not syntactically valid.

AWSBIB019E   User job name is not syntactically valid.

AWSBIB020E   File name is not syntactically valid.

AWSBIB021E   File group name is not syntactically valid.

AWSBIB022E   File account name is not syntactically valid.

AWSBIB023E   There is a syntax error in the job statement in the job stream definition. The user name associated with the streamlogon keyword is not syntactically valid. The name can contain up to 47 bytes. If the name contains special characters they must be enclosed in quotes ().

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB024E   Group name in streamed job's logon is not syntactically valid.

AWSBIB025E   Account name in streamed job's logon is not syntactically valid.

AWSBIB026E   There is a syntax error. A non-valid date has been specified. The date format is determined by the value in the useropts file.

Explanation

See message. If the format cannot be found in the useropts file, it is obtained from the localopts file.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB027E   There is a syntax error. The at keyword can be specified for a job or its job stream (not both).

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB028E   There is a syntax error. The until keyword can be specified for a job or its job stream (not both).

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB029E   There is a syntax error. The needs keyword can be specified for a job or its job stream (not both).

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB030W   Resource CPU should match either job's or schedule's cpuid

AWSBIB032E   Internal Error

AWSBIB033E   The file "file_name" could not be opened.

Explanation

This message can be displayed for either a user file or an internal work file. If it is a user file you might be able to correct the error. If it is an internal file it might be an internal error.

System action

The submitted command cannot be performed.

Operator response

Check the displayed file name.

  • If it is a user file, make sure that the file exists, is in the correct directory, and has the correct permissions for the HCL Workload Automation.
  • If it is not a user file, ensure that the indicated directory has sufficient disk space to open a file, and that the operating system has sufficient file descriptors available

If you identify an error, correct it and rerun the command. If not, this is an internal error, and search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIB034E   There is a syntax error in the job statement of the job stream definition. A duplicate keyword has been supplied.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB035E   There is a syntax error. The required on keyword is missing.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB036E   There is a syntax error. The job stream definition does not start with the schedule keyword.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB037E   Expected a Job description

AWSBIB038E   There is a syntax error. An object identifier (for example, a job name) is missing.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB039E   There is a syntax error. A numeric value (for example, the priority value) has not been supplied.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB040E   There is a syntax error. An object identifier (for example, a job name) or the @ wildcard is missing.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB041E   There is a syntax error. A date-related keyword has been supplied (for example, deadline) but it is not followed by a date or day specification, or a calendar or iCalendar name.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB042E   There is a syntax error. A day, weekday, or workday keyword has been supplied, but it is not preceded by an offset value.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB043E   There is a syntax error. A dependency specification or other keyword is missing, or an incorrect keyword has been supplied.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB044E   There is a syntax error. A time-related keyword (for example, every) has been supplied, but its value is either missing or is not a valid time specification.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB045E   There is a syntax error. An opens keyword has been supplied, but its value is either missing or is not a valid file name.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB046E   Expected a day specification.

AWSBIB047E   There is a syntax error. An except keyword has been supplied, but its value is either missing or is not a valid date specification, day specification, calendar or iCalendar name.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB048E   Expected a calendar name.

AWSBIB049E   Expected a job autodoc specification.

AWSBIB050E   Expected an autodoc option.

AWSBIB051E   There is a syntax error. The prompt keyword has been supplied, but is not followed by a prompt name or the prompt text enclosed in quotes.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB052E   There is a syntax error. The end keyword has not been found to stop the job stream definition.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB053E   There is a syntax error. A file name has been supplied with an incorrect syntax.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command. Ensure that the file name is fully qualified.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB054E   There is a syntax error. The supplied fully qualified path name is longer than the maximum of "maximum_path_name_length" bytes.

Explanation

See message.

maximum_path_name_length is the maximum number of bytes permitted in the path name.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB055E   There is a syntax error. The supplied logon name is longer than the maximum of "maximum_logon_name_length" bytes.

Explanation

See message.

maximum_logon_name_length is the maximum number of bytes permitted in the logon name.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB056E   There is a syntax error. The supplied file name is longer than the maximum of "maximum_file_name_length" bytes.

Explanation

See message.

maximum_file_name_length is the maximum number of bytes permitted in the file name (excluding the path information).

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB057E   There is a syntax error. The supplied abendprompt is longer than the maximum of "abendprompt_length" bytes.

Explanation

See message.

abendprompt_length is the maximum number of bytes permitted in the abendprompt.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB058E   There is a syntax error. The supplied Windows domain name is not syntactically valid. The name can contain up to 16 bytes (including the backslash), and the user name can contain up to 31 bytes.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB059E   There is a syntax error. The supplied timezone keyword is not followed by valid time zone information.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB060E   There is a syntax error. The supplied timezone keyword is not followed by a time zone name.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB061E   There is a syntax error. The supplied time zone name is not a recognized time zone.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB062E   There is a syntax error. The supplied time zone name is longer than 40 bytes.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB063E   There is a syntax error. The scheduler has determined that a job statement has commenced but it is not preceded by the : character.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB064E   There is a syntax error. The dates specified with the on and except keywords are not compatible. For example, you might have defined the same date or dates for both.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB065E   There is a syntax error. The deadline offset can be specified for a job or its job stream (not both).

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB066E   There is a syntax error in the job statement in the job stream definition. The rccondsucc keyword defines a return code success condition expression which is longer than the maximum number of bytes allowed: "maximum_expression_length".

Explanation

See message.

maximum_expression_length is the maximum number of bytes that can be included in the expression.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB067E   There is a syntax error. The return code condition expression: "expression" is not syntactically valid.

Explanation

See message.expression is the expression which is not valid.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB068E   The time in the relative from <time> to <time> clause of the matching or follows keyword is not in the valid format [+/-][h]hhmm (where mm is between 00-59).

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB069E   The time in the from <time> to <time> clause of the matching or follows keyword must be between 0000-2359.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB070E   There is a syntax error. An at or a schedtime keyword has been specified with a time specification, but is not followed by a timezone/tz or daykeyword, or a right bracket.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB071E   An error has occurred due to either a syntax error or unacceptable value when specifying the time for either the maxdur or mindur keyword, or both. The correct format and acceptable values for the time specified for the keywords are: [h]hhmm (where, hhh represents the number of hours ranging from 000-500, and mm represents the number of minutes ranging from 00-59).

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB072E   The percentage specified for the maxdur or mindur keyword is either not in the valid format or an unacceptable value has been specified. The correct format and acceptable values are: percentage % (where percentage is a number ranging from 0-1000000).

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB200E   There is a syntax error. An object identifier (for example, a job name) is longer than the maximum number of bytes.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB201E   There is a syntax error. An object identifier (for example, a job name) must begin with an alphabetic character.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB202E   There is a syntax error. An object identifier (for example, a job name) contains non valid characters.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB206E   There is a syntax error. More than one parameter was specified.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB208E   There is a syntax error. The number of job stream dependencies exceeds the maximum number allowed.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB209E   There is a syntax error. The number of job dependencies exceeds the maximum number allowed.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB210E   Missing parameter ^^ was specified.

AWSBIB211W   The IN ORDER keyword must be the last keyword.

AWSBIB212E   No dependencies are allowed when IN ORDER is specified

AWSBIB213E   There is a syntax error. A blank name has been supplied.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB214E   There is a syntax error. The onuntil keyword has a non-valid value. Valid values are suppr, cont or canc.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Check the syntax of the job stream definition. Change the value of the onuntil keyword to one of the indicated valid values and retry the operation.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB215E   There is a syntax error. Either the follows or matching keyword is not followed by one of the following keywords: previous, sameday, relative from, or from.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB216E   There is a syntax error. Expected the keyword set: from <time> to <time>.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB217E   There is a syntax error. Expected the keyword set: relative from <time> to <time> (<time> is expressed as HHMM, and the permitted values are between 0000 and 2359)

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB219E   There is a syntax error. More than one matching keyword has been supplied.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB220E   There is a syntax error. A non-valid job alias has been supplied.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB221E   There is a syntax error. A non-valid runcycle name has been supplied.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB222E   Duplicated runcycle name.

Explanation

This is a parser error, please check the scheduling language

AWSBIB223E   There is a syntax error. A value has been supplied for a description keyword that is longer than the maximum length of "maximum_description_length" bytes.

Explanation

See message.

maximum_description_length is the maximum length of the value of the description keyword.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB224E   There is a syntax error. An external string dependency has been supplied that is longer than the maximum length of "maximum_description_length" bytes.

Explanation

See message.

maximum_description_length is the maximum length of the external string dependency.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB225E   There is a syntax error. An iCalendar name has been supplied that is longer than the maximum length of "maximum_description_length" bytes.

Explanation

See message.

maximum_description_length is the maximum length of the iCalendar name.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB226E   There is a syntax error. A day[s] offset for a relative from <time> to <time> or a from <time> to <time> clause has been supplied that is greater than the maximum of "maximum_offset" days.

Explanation

See message.

maximum_offset is the maximum number of offset days of the relative from or from clause.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB227E   There is a syntax error. An day[s] offset for an at, until, or deadline clause has been supplied that is greater than the maximum of "maximum_offset" days.

Explanation

See message.

maximum_offset is the maximum number of offset days of the at, until, or deadline clause.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB228E   There is a syntax error. An every keyword has been supplied with a rate not in the range 0 - "maximum_rate".

Explanation

See message.

maximum_rate is the maximum value that the everyrate can have. The rate is in the format hhmm.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB229E   An iCalendar cannot be empty.

Explanation

This is a parser error, please check the scheduling language

AWSBIB230E   There is a syntax error. The keyword "keyword" is not correct at this position.

Explanation

See message.

keyword is the keyword that is out of position.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB231E   There is a syntax error. A relative from <time> to <time> or a from <time> to <time> clause has been supplied where the from time is later than the to time.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB232E   There is a syntax error. The value specified for the onmaxdur keyword is not valid. Valid values are kill or cont.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Check the syntax of the job stream definition. Specify a valid value for the onmaxdur keyword and retry the operation.

The User's Guide and Reference for full details about the scheduling language syntax.

AWSBIB233E   There is a syntax error. The value specified for the onmindur keyword is not valid. Valid values are confirm, abend or cont.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Check the syntax of the job stream definition. Specify a valid value for the onmindur keyword and retry the operation.

The User's Guide and Reference for full details about the scheduling language syntax.

AWSBIB234E   There is a syntax error. A valid output condition name is required.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB235E   Condition names must be unique. A duplicate output condition name was specified.

Explanation

A parser error has occurred, check the scheduling language.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB236E   Conditional dependency names must be unique. A duplicate conditional dependency name was specified.

Explanation

A parser error has occurred, check the scheduling language.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for details about the valid composer syntax for a follows dependency.

AWSBIB237E   There is a syntax error. The conditional dependency name specified is not valid.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for details about the valid composer usage for a follows dependency.

AWSBIB238E   There is a syntax error. The conditional dependency expression you specified is not in context with a conditional dependency based on an output condition.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for details about the valid composer syntax for a follows dependency.

AWSBIB239E   There is a syntax error. The conditional dependency you specified is not in context with a conditional dependency based on the final status of the predecessor.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for details about the valid composer syntax for a follows dependency.

AWSBIB240E   There is a syntax error. The conditional dependency expression you specified is not in consistent with a conditional dependency based on the provided precedessor.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for details about the valid composer syntax for a follows dependency.

AWSBIB241E   There is a syntax error. The conditional dependency expression you specified is not in context with a conditional dependency based on when the predecessor job starts.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for details about the valid composer syntax for a follows dependency.

AWSBIB315E   Either a job or job stream identifier is missing, or the matching criteria is not valid.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB316E   There is a syntax error. A recovery action has been supplied that is not stop, continue, or rerun.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB317E   The path of a filename in the opens dependencies and its qualifier cannot exceed "dependency_file_name_max_length" bytes.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB318E   You cannot specify a time zone for the run cycle time dependencies.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB319E   There is an error in the job definition. The sum of the docommand string and the rccondsucc string must not be greater than "maximum_length" bytes.

Explanation

See message.

maximum_length is the maximum length of the sum of the docommand string and the rccondsucc string.

System action

The submitted command cannot be performed.

Operator response

Correct the job definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB320W   The specified keyword is not allowed in a job definition outside a job stream.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB321E   A variable table name is expected at this point, but was not supplied.

Explanation

See message.

System action

The operation is not performed.

Operator response

Correct the variable table reference in the job stream definition and retry the operation.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB322E   The variable table name exceeds the maximum length of "maximum_variable_table_size" bytes.

Explanation

maximum_variable_table_size is the maximum size in bytes of the variable table.

System action

The operation is not performed.

Operator response

Correct the variable table reference in the job stream definition and retry the operation.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB323W   The tasktype keyword has been supplied for job definition "job_definition", for which it is not required. It has been ignored.

Explanation

See message.

System action

Processing continues, ignoring the tasktype field.

Operator response

No action is required, but to avoid receiving this warning in future ensure to not specify the tasktype field when defining a job definition.

AWSBIB324W   The interactive keyword has been supplied for job definition "job_definition", for which it is not required. It has been ignored.

Explanation

See message.

System action

Processing continues, ignoring the interactive field.

Operator response

No action is required, but to avoid receiving this warning in future ensure to not specify the interactive field when defining a job definition.

AWSBIB325E   The task definition supplied for job definition "job_definition" is not well formatted.

Explanation

job_definition is the job definition to validate.

System action

The operation is not performed.

Operator response

Correct the task definition in the job definition and retry the operation.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB326E   There is a syntax error. The run cycle group name is not valid. The name must start with an alphabetical character, and can contain alphanumeric characters, dashes, and underscores. It can contain up to 40 bytes.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB327E   There is a syntax error. A valid run cycle subset name was expected but was not found. The subset name must start with either an alphabetical character or number, and can contain alphanumeric characters, dashes, and underscores. It can contain a maximum of 40 bytes.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB328E   There is a syntax error. The run cycle subset cannot be specified in the job stream definition.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB329E   There is a syntax error. The run cycle group name is not valid. The name must start with an alphabetical character, and can contain alphanumeric characters, dashes and underscores. It can contain up to 40 bytes.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB330W   The specified keyword cannot be defined in a run cycle group definition.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the run cycle group definition, specifying only suppported keywords, and submit the command again.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB331E   There is a syntax error. The end keyword is missing from the run cycle group definition.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB332E   There is a syntax error. The run cycle type run cycle group cannot be specified inside the run cycle group definition.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB333E   There is a syntax error. A value has been supplied for the subset keyword that is longer than the maximum length of "maximum_subset_length" bytes.

Explanation

See message.

maximum_subset_length is the maximum length of the value of the subset keyword.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB334E   There is a syntax error. The runcyclegroup keyword is missing from the start of the run cycle group definition.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB335E   There is a syntax error. The every keyword is not followed by the everyendtime keyword.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB336E   There is a syntax error. The onoverlap keyword has a non-valid value. Valid values are parallel, donotstart or enqueue.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Check the syntax of the job stream definition. Change the value of the onoverlap keyword to one of the indicated valid values and retry the operation.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB337E   There is a syntax error. The statisticstype keyword has a non-valid value. Valid values are automatic or custom.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Check the syntax of the job stream definition. Change the value of the statisticstype keyword to one of the indicated valid values and retry the operation.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB338E   There is a syntax error. The number of joined conditional dependencies exceeds the maximum supported number.

Explanation

A parser error has occurred, check the scheduling language.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB339E   There is a syntax error. The name of the joined conditional dependencies is not syntactically valid. The name must start with a letter, and can contain alphanumeric characters, dashes, and underscores. It can contain up to 16 bytes.

Explanation

A parser error has occurred, check the scheduling language.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB340E   Joined conditional dependencies names must be unique. A duplicate name was specified.

Explanation

A parser error has occurred, check the scheduling language.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB341E   There is a syntax error. The name of the joined conditional dependencies is not followed by the number of dependencies to be met.

Explanation

A parser error has occurred, check the scheduling language.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB342E   There is a syntax error. The endjoin to close the joined conditional dependencies definition was not found.

Explanation

A parser error has occurred, check the scheduling language.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB343E   There is a syntax error. The number of dependencies to be met in the joined conditional dependencies is not syntactically valid. The value must be a number between 0 and the total number of subsequent predecessors, or all.

Explanation

A parser error has occurred, check the scheduling language.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB344E   There is a syntax error. The follows keyword was not found in the joined conditional dependencies definition.

Explanation

A parser error has occurred, check the scheduling language.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB345E   There is a syntax error. Internetwork dependencies are not supported in joined conditional dependencies definition.

Explanation

A parser error has occurred, check the scheduling language.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB346E   There is a syntax error. The description keyword has been specified, but the related text is not enclosed in quotes or is missing.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB347E   There is a syntax error. The return code condition expression is missing or is not enclosed in quotes.

Explanation

See message.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB348E   The output condition name exceeds the maximum length of "maximum_output_cond_size" bytes.

Explanation

maximum_output_cond_size is the maximum size in bytes of the output condition name.

System action

The submitted command cannot be performed.

Operator response

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB349E   A syntax error has occurred at line "line_number": unexpected token "unexpected_token". The parsing operation has stopped at the token in error.

Explanation

A parser error has occurred, check the scheduling language.

AWSBIB350E   A syntax error has occurred during the parsing operation of the object "object_name". The parsing operation has stopped.

Explanation

A parser error has occurred, check the scheduling language.

AWSBIB351E   A syntax error has occurred during the parsing operation. The parsing operation has stopped.

Explanation

A parser error has occurred, check the scheduling language.