AWSBIB - Scheduling language parser messages
This section lists scheduling language parser error and warning messages that might be issued.
The message component code is BIB.
AWSBIB001E There is a syntax error. The time specified in the at, until, or deadline time definitions must be between 0000 and 2359 (hhmm).
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB002E There is a syntax error. The job limit must be between 0 and 1024.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB003W The resource number must be between 1 and 32.
AWSBIB004W There is a syntax error. Priority must be a numeric value from 0 to 99, hi (= 100), or go (= 101).
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB006E There is a syntax error. The job stream name is not syntactically valid. The name must start with a letter, and can contain alphanumeric characters, dashes, and underscores. It can contain up to 16 bytes.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB007E There is a syntax error. The job name is not syntactically valid. The name must start with a letter, and can contain alphanumeric characters, dashes and underscores. It can contain up to 40 bytes.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB008E There is a syntax error. The resource name is not syntactically valid. The name must start with a letter, and can contain alphanumeric characters, dashes and underscores. It can contain up to 8 bytes.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB009E There is a syntax error. The prompt name is not syntactically valid. The name must start with a letter, and can contain alphanumeric characters, dashes and underscores. It can contain up to 8 bytes.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB010E There is a syntax error. The calendar name is not syntactically valid. The name must start with a letter, and can contain alphanumeric characters, dashes and underscores. It can contain up to 8 bytes.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB011E There is a syntax error. The recovery job name is not syntactically valid. The name must start with a letter, and can contain alphanumeric characters, dashes and underscores. It can contain up to 40 bytes.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB012E Recovery job lockword is not syntactically valid.
AWSBIB013E Recovery job password is not syntactically valid.
AWSBIB014E There is a syntax error in the job statement in the job stream definition. The required streamlogon <username> argument has not been supplied.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB015E Invalid logon for MPE job
AWSBIB016E There is a syntax error in the job statement in the job stream definition. The streamlogon user name is not syntactically valid. The name must be no more than 47 bytes, and cannot contain periods or other special characters.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB017E Group name is not syntactically valid.
AWSBIB018E Account name is not syntactically valid.
AWSBIB019E User job name is not syntactically valid.
AWSBIB020E File name is not syntactically valid.
AWSBIB021E File group name is not syntactically valid.
AWSBIB022E File account name is not syntactically valid.
AWSBIB023E There is a syntax error in the job statement in the job stream definition. The user name associated with the streamlogon keyword is not syntactically valid. The name can contain up to 47 bytes. If the name contains special characters they must be enclosed in quotes ().
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB024E Group name in streamed job's logon is not syntactically valid.
AWSBIB025E Account name in streamed job's logon is not syntactically valid.
AWSBIB026E There is a syntax error. A non-valid date has been specified. The date format is determined by the value in the useropts file.
Explanation
See message. If the format cannot be found in the useropts file, it is obtained from the localopts file.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB027E There is a syntax error. The at keyword can be specified for a job or its job stream (not both).
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB028E There is a syntax error. The until keyword can be specified for a job or its job stream (not both).
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB029E There is a syntax error. The needs keyword can be specified for a job or its job stream (not both).
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB030W Resource CPU should match either job's or schedule's cpuid
AWSBIB032E Internal Error
AWSBIB033E The file "file_name" could not be opened.
Explanation
This message can be displayed for either a user file or an internal work file. If it is a user file you might be able to correct the error. If it is an internal file it might be an internal error.
System action
The submitted command cannot be performed.
Operator response
Check the displayed file name.
- If it is a user file, make sure that the file exists, is in the correct directory, and has the correct permissions for the HCL Workload Automation.
- If it is not a user file, ensure that the indicated directory has sufficient disk space to open a file, and that the operating system has sufficient file descriptors available
If you identify an error, correct it and rerun the command. If not, this is an internal error, and search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.
AWSBIB034E There is a syntax error in the job statement of the job stream definition. A duplicate keyword has been supplied.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB035E There is a syntax error. The required on keyword is missing.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB036E There is a syntax error. The job stream definition does not start with the schedule keyword.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB037E Expected a Job description
AWSBIB038E There is a syntax error. An object identifier (for example, a job name) is missing.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB039E There is a syntax error. A numeric value (for example, the priority value) has not been supplied.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB040E There is a syntax error. An object identifier (for example, a job name) or the @ wildcard is missing.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB041E There is a syntax error. A date-related keyword has been supplied (for example, deadline) but it is not followed by a date or day specification, or a calendar or iCalendar name.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB042E There is a syntax error. A day, weekday, or workday keyword has been supplied, but it is not preceded by an offset value.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB043E There is a syntax error. A dependency specification or other keyword is missing, or an incorrect keyword has been supplied.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB044E There is a syntax error. A time-related keyword (for example, every) has been supplied, but its value is either missing or is not a valid time specification.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB045E There is a syntax error. An opens keyword has been supplied, but its value is either missing or is not a valid file name.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB046E Expected a day specification.
AWSBIB047E There is a syntax error. An except keyword has been supplied, but its value is either missing or is not a valid date specification, day specification, calendar or iCalendar name.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB048E Expected a calendar name.
AWSBIB049E Expected a job autodoc specification.
AWSBIB050E Expected an autodoc option.
AWSBIB051E There is a syntax error. The prompt keyword has been supplied, but is not followed by a prompt name or the prompt text enclosed in quotes.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB052E There is a syntax error. The end keyword has not been found to stop the job stream definition.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB053E There is a syntax error. A file name has been supplied with an incorrect syntax.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command. Ensure that the file name is fully qualified.
AWSBIB054E There is a syntax error. The supplied fully qualified path name is longer than the maximum of "maximum_path_name_length" bytes.
Explanation
See message.
maximum_path_name_length is the maximum number of bytes permitted in the path name.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB055E There is a syntax error. The supplied logon name is longer than the maximum of "maximum_logon_name_length" bytes.
Explanation
See message.
maximum_logon_name_length is the maximum number of bytes permitted in the logon name.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB056E There is a syntax error. The supplied file name is longer than the maximum of "maximum_file_name_length" bytes.
Explanation
See message.
maximum_file_name_length is the maximum number of bytes permitted in the file name (excluding the path information).
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB057E There is a syntax error. The supplied abendprompt is longer than the maximum of "abendprompt_length" bytes.
Explanation
See message.
abendprompt_length is the maximum number of bytes permitted in the abendprompt.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB058E There is a syntax error. The supplied Windows domain name is not syntactically valid. The name can contain up to 16 bytes (including the backslash), and the user name can contain up to 31 bytes.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB059E There is a syntax error. The supplied timezone keyword is not followed by valid time zone information.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB060E There is a syntax error. The supplied timezone keyword is not followed by a time zone name.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB061E There is a syntax error. The supplied time zone name is not a recognized time zone.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB062E There is a syntax error. The supplied time zone name is longer than 40 bytes.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB063E There is a syntax error. The scheduler has determined that a job statement has commenced but it is not preceded by the : character.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB064E There is a syntax error. The dates specified with the on and except keywords are not compatible. For example, you might have defined the same date or dates for both.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB065E There is a syntax error. The deadline offset can be specified for a job or its job stream (not both).
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB066E There is a syntax error in the job statement in the job stream definition. The rccondsucc keyword defines a return code success condition expression which is longer than the maximum number of bytes allowed: "maximum_expression_length".
Explanation
See message.
maximum_expression_length is the maximum number of bytes that can be included in the expression.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB067E There is a syntax error. The return code condition expression: "expression" is not syntactically valid.
Explanation
See message.expression is the expression which is not valid.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB068E The time in the relative from <time> to <time> clause of the matching or follows keyword is not in the valid format [+/-][h]hhmm (where mm is between 00-59).
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB069E The time in the from <time> to <time> clause of the matching or follows keyword must be between 0000-2359.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB070E There is a syntax error. An at or a schedtime keyword has been specified with a time specification, but is not followed by a timezone/tz or daykeyword, or a right bracket.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB071E An error has occurred due to either a syntax error or unacceptable value when specifying the time for either the maxdur or mindur keyword, or both. The correct format and acceptable values for the time specified for the keywords are: [h]hhmm (where, hhh represents the number of hours ranging from 000-500, and mm represents the number of minutes ranging from 00-59).
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB072E The percentage specified for the maxdur or mindur keyword is either not in the valid format or an unacceptable value has been specified. The correct format and acceptable values are: percentage % (where percentage is a number ranging from 0-1000000).
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB200E There is a syntax error. An object identifier (for example, a job name) is longer than the maximum number of bytes.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB201E There is a syntax error. An object identifier (for example, a job name) must begin with an alphabetic character.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB202E There is a syntax error. An object identifier (for example, a job name) contains non valid characters.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB206E There is a syntax error. More than one parameter was specified.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB208E There is a syntax error. The number of job stream dependencies exceeds the maximum number allowed.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB209E There is a syntax error. The number of job dependencies exceeds the maximum number allowed.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB210E Missing parameter ^^ was specified.
AWSBIB211W The IN ORDER keyword must be the last keyword.
AWSBIB212E No dependencies are allowed when IN ORDER is specified
AWSBIB213E There is a syntax error. A blank name has been supplied.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB214E There is a syntax error. The onuntil keyword has a non-valid value. Valid values are suppr, cont or canc.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Check the syntax of the job stream definition. Change the value of the onuntil keyword to one of the indicated valid values and retry the operation.
AWSBIB215E There is a syntax error. Either the follows or matching keyword is not followed by one of the following keywords: previous, sameday, relative from, or from.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB216E There is a syntax error. Expected the keyword set: from <time> to <time>.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB217E There is a syntax error. Expected the keyword set: relative from <time> to <time> (<time> is expressed as HHMM, and the permitted values are between 0000 and 2359)
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB219E There is a syntax error. More than one matching keyword has been supplied.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB220E There is a syntax error. A non-valid job alias has been supplied.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB221E There is a syntax error. A non-valid runcycle name has been supplied.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB222E Duplicated runcycle name.
Explanation
This is a parser error, please check the scheduling language
AWSBIB223E There is a syntax error. A value has been supplied for a description keyword that is longer than the maximum length of "maximum_description_length" bytes.
Explanation
See message.
maximum_description_length is the maximum length of the value of the description keyword.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB224E There is a syntax error. An external string dependency has been supplied that is longer than the maximum length of "maximum_description_length" bytes.
Explanation
See message.
maximum_description_length is the maximum length of the external string dependency.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB225E There is a syntax error. An iCalendar name has been supplied that is longer than the maximum length of "maximum_description_length" bytes.
Explanation
See message.
maximum_description_length is the maximum length of the iCalendar name.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB226E There is a syntax error. A day[s] offset for a relative from <time> to <time> or a from <time> to <time> clause has been supplied that is greater than the maximum of "maximum_offset" days.
Explanation
See message.
maximum_offset is the maximum number of offset days of the relative from or from clause.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB227E There is a syntax error. An day[s] offset for an at, until, or deadline clause has been supplied that is greater than the maximum of "maximum_offset" days.
Explanation
See message.
maximum_offset is the maximum number of offset days of the at, until, or deadline clause.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB228E There is a syntax error. An every keyword has been supplied with a rate not in the range 0 - "maximum_rate".
Explanation
See message.
maximum_rate is the maximum value that the everyrate can have. The rate is in the format hhmm.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB229E An iCalendar cannot be empty.
Explanation
This is a parser error, please check the scheduling language
AWSBIB230E There is a syntax error. The keyword "keyword" is not correct at this position.
Explanation
See message.
keyword is the keyword that is out of position.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB231E There is a syntax error. A relative from <time> to <time> or a from <time> to <time> clause has been supplied where the from time is later than the to time.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB232E There is a syntax error. The value specified for the onmaxdur keyword is not valid. Valid values are kill or cont.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Check the syntax of the job stream definition. Specify a valid value for the onmaxdur keyword and retry the operation.
AWSBIB233E There is a syntax error. The value specified for the onmindur keyword is not valid. Valid values are confirm, abend or cont.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Check the syntax of the job stream definition. Specify a valid value for the onmindur keyword and retry the operation.
AWSBIB234E There is a syntax error. A valid output condition name is required.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB235E Condition names must be unique. A duplicate output condition name was specified.
Explanation
A parser error has occurred, check the scheduling language.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB236E Conditional dependency names must be unique. A duplicate conditional dependency name was specified.
Explanation
A parser error has occurred, check the scheduling language.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB237E There is a syntax error. The conditional dependency name specified is not valid.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB238E There is a syntax error. The conditional dependency expression you specified is not in context with a conditional dependency based on an output condition.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB239E There is a syntax error. The conditional dependency you specified is not in context with a conditional dependency based on the final status of the predecessor.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB240E There is a syntax error. The conditional dependency expression you specified is not in consistent with a conditional dependency based on the provided precedessor.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB241E There is a syntax error. The conditional dependency expression you specified is not in context with a conditional dependency based on when the predecessor job starts.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB315E Either a job or job stream identifier is missing, or the matching criteria is not valid.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB316E There is a syntax error. A recovery action has been supplied that is not stop, continue, or rerun.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB317E The path of a filename in the opens dependencies and its qualifier cannot exceed "dependency_file_name_max_length" bytes.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB318E You cannot specify a time zone for the run cycle time dependencies.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream definition and resubmit the command.
AWSBIB319E There is an error in the job definition. The sum of the docommand string and the rccondsucc string must not be greater than "maximum_length" bytes.
Explanation
See message.
maximum_length is the maximum length of the sum of the docommand string and the rccondsucc string.
System action
The submitted command cannot be performed.
Operator response
Correct the job definition and resubmit the command.
AWSBIB320W The specified keyword is not allowed in a job definition outside a job stream.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job definition and resubmit the command.
AWSBIB321E A variable table name is expected at this point, but was not supplied.
Explanation
See message.
System action
The operation is not performed.
Operator response
Correct the variable table reference in the job stream definition and retry the operation.
AWSBIB322E The variable table name exceeds the maximum length of "maximum_variable_table_size" bytes.
Explanation
maximum_variable_table_size is the maximum size in bytes of the variable table.
System action
The operation is not performed.
Operator response
Correct the variable table reference in the job stream definition and retry the operation.
AWSBIB323W The tasktype keyword has been supplied for job definition "job_definition", for which it is not required. It has been ignored.
Explanation
See message.
System action
Processing continues, ignoring the tasktype field.
Operator response
No action is required, but to avoid receiving this warning in future ensure to not specify the tasktype field when defining a job definition.
AWSBIB324W The interactive keyword has been supplied for job definition "job_definition", for which it is not required. It has been ignored.
Explanation
See message.
System action
Processing continues, ignoring the interactive field.
Operator response
No action is required, but to avoid receiving this warning in future ensure to not specify the interactive field when defining a job definition.
AWSBIB325E The task definition supplied for job definition "job_definition" is not well formatted.
Explanation
job_definition is the job definition to validate.
System action
The operation is not performed.
Operator response
Correct the task definition in the job definition and retry the operation.
AWSBIB326E There is a syntax error. The run cycle group name is not valid. The name must start with an alphabetical character, and can contain alphanumeric characters, dashes, and underscores. It can contain up to 40 bytes.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB327E There is a syntax error. A valid run cycle subset name was expected but was not found. The subset name must start with either an alphabetical character or number, and can contain alphanumeric characters, dashes, and underscores. It can contain a maximum of 40 bytes.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB328E There is a syntax error. The run cycle subset cannot be specified in the job stream definition.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB329E There is a syntax error. The run cycle group name is not valid. The name must start with an alphabetical character, and can contain alphanumeric characters, dashes and underscores. It can contain up to 40 bytes.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB330W The specified keyword cannot be defined in a run cycle group definition.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the run cycle group definition, specifying only suppported keywords, and submit the command again.
AWSBIB331E There is a syntax error. The end keyword is missing from the run cycle group definition.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB332E There is a syntax error. The run cycle type run cycle group cannot be specified inside the run cycle group definition.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB333E There is a syntax error. A value has been supplied for the subset keyword that is longer than the maximum length of "maximum_subset_length" bytes.
Explanation
See message.
maximum_subset_length is the maximum length of the value of the subset keyword.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB334E There is a syntax error. The runcyclegroup keyword is missing from the start of the run cycle group definition.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB335E There is a syntax error. The every keyword is not followed by the everyendtime keyword.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB336E There is a syntax error. The onoverlap keyword has a non-valid value. Valid values are parallel, donotstart or enqueue.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Check the syntax of the job stream definition. Change the value of the onoverlap keyword to one of the indicated valid values and retry the operation.
AWSBIB337E There is a syntax error. The statisticstype keyword has a non-valid value. Valid values are automatic or custom.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Check the syntax of the job stream definition. Change the value of the statisticstype keyword to one of the indicated valid values and retry the operation.
AWSBIB338E There is a syntax error. The number of joined conditional dependencies exceeds the maximum supported number.
Explanation
A parser error has occurred, check the scheduling language.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB339E There is a syntax error. The name of the joined conditional dependencies is not syntactically valid. The name must start with a letter, and can contain alphanumeric characters, dashes, and underscores. It can contain up to 16 bytes.
Explanation
A parser error has occurred, check the scheduling language.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB340E Joined conditional dependencies names must be unique. A duplicate name was specified.
Explanation
A parser error has occurred, check the scheduling language.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB341E There is a syntax error. The name of the joined conditional dependencies is not followed by the number of dependencies to be met.
Explanation
A parser error has occurred, check the scheduling language.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB342E There is a syntax error. The endjoin to close the joined conditional dependencies definition was not found.
Explanation
A parser error has occurred, check the scheduling language.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB343E There is a syntax error. The number of dependencies to be met in the joined conditional dependencies is not syntactically valid. The value must be a number between 0 and the total number of subsequent predecessors, or all.
Explanation
A parser error has occurred, check the scheduling language.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB344E There is a syntax error. The follows keyword was not found in the joined conditional dependencies definition.
Explanation
A parser error has occurred, check the scheduling language.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB345E There is a syntax error. Internetwork dependencies are not supported in joined conditional dependencies definition.
Explanation
A parser error has occurred, check the scheduling language.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB346E There is a syntax error. The description keyword has been specified, but the related text is not enclosed in quotes or is missing.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB347E There is a syntax error. The return code condition expression is missing or is not enclosed in quotes.
Explanation
See message.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB348E The output condition name exceeds the maximum length of "maximum_output_cond_size" bytes.
Explanation
maximum_output_cond_size is the maximum size in bytes of the output condition name.
System action
The submitted command cannot be performed.
Operator response
Correct the job stream or run cycle group or job definition and resubmit the command.
AWSBIB349E A syntax error has occurred at line "line_number": unexpected token "unexpected_token". The parsing operation has stopped at the token in error.
Explanation
A parser error has occurred, check the scheduling language.
AWSBIB350E A syntax error has occurred during the parsing operation of the object "object_name". The parsing operation has stopped.
Explanation
A parser error has occurred, check the scheduling language.
AWSBIB351E A syntax error has occurred during the parsing operation. The parsing operation has stopped.
Explanation
A parser error has occurred, check the scheduling language.