HCL Workload Automation, Version 9.4

AWSBIJ - Jobmon specific error messages

This section lists error and warning messages that could be issued by the routines that handle the Jobmon process.

The message component code is BIJ.

AWSBIJ001E   An internal error has occurred. Jobmon is unable to create a socket for communication with jobman. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

Jobman is trying to send jobmon the messages that it reads from the message file, Courier.msg, using the socket.

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon might stop.

Operator response

An internal error has occurred. If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ002E   Unable to get hostname !1:!2 error = !3 : !4.

AWSBIJ003E   Unable to get host entries by name !1:!2 error = !3 : !4.

AWSBIJ004E   An internal error has occurred. Jobmon is unable to bind the socket to the address used for communication with jobman. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

Jobman is trying to send jobmon the messages that it reads from the message file, Courier.msg, using the socket.

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon might stop.

Operator response

An internal error has occurred. If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ005E   An internal error has occurred. Jobmon is unable to obtain the socket attributes for communication with jobman. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

Jobman is trying to send jobmon the messages that it reads from the message file, Courier.msg, using the socket.

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon might stop.

Operator response

An internal error has occurred. If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ006E   An internal error has occurred. Jobmon is unable to listen for connection requests from jobman. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

Jobman is trying to send jobmon the messages that it reads from the message file, Courier.msg.

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon might stop.

Operator response

An internal error has occurred. If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ007E   An internal error has occurred. Jobmon is unable to accept a connection request from jobman. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

Jobman is trying to send jobmon the messages that it reads from the message file, Courier.msg.

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon might stop.

Operator response

An internal error has occurred. If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ008E   An internal error has occurred. Jobmon is unable to unable to allocate sufficient memory to process requests from jobman. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

Jobman is trying to send jobmon the messages that it reads from the message file, Courier.msg.

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon might stop.

Operator response

Check the following:

  1. Verify if the workstation on which jobmon is running has enough memory available. Information about the memory requirements of HCL Workload Automation is provided in the Release Notes. If not, you may need to increase the memory of the workstation or make changes in memory management and paging to make more memory available to jobmon. Use the workstation stop and start commands to restart jobmon.
  2. If the workstation memory is adequate, try closing all the applications that you do not need, and then use the workstation stop and start commands to restart jobmon..
  3. If the problem persists, reboot the workstation, and then run the start command to start jobmon.
  4. If the problem persists, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.
The Release Notes for details of memory requirements.

AWSBIJ009E   An internal error has occurred. Jobmon is unable to select a data socket for a communication request from jobman. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

Jobman is trying to send jobmon the messages that it reads from the message file, Courier.msg.

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon might stop.

Operator response

An internal error has occurred. If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ010E   An internal error has occurred. Jobmon is unable to read the data received from jobman. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

Jobman is trying to send jobmon the messages that it reads from the message file, Courier.msg.

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon might stop.

Operator response

An internal error has occurred. If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ011E   An internal error has occurred. Jobmon either cannot generate a temporary file name, or is unable to retrieve a system configuration value. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

In the case where the system configuration value could not be retrieved, the value is the number of clock intervals per second that are used to report run times by the system. The value is needed to report a job run time in seconds.

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon might stop.

Operator response

An internal error has occurred. If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ012E   Error changing directory !1:!2 error = !3 : !4.

AWSBIJ013E   Error opening file !1:!2 error = !3 : !4.

AWSBIJ100E   An internal error has occurred. Jobmon has received an error when using a Windows system call (API). The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds. The operation is not performed.

Operator response

Read the description of the internal system error and try to correct it. If you have corrected it, use the workstation stop and start commands to restart jobmon.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ101E   An internal error has occurred. Jobmon was unable to create a new process and its primary thread. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds. The operation is not performed.

Operator response

Read the description of the internal system error and try to correct it. If you have corrected it, use the workstation stop and start commands to restart jobmon.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ102E   An internal error has occurred. Jobmon cannot determine the state of an opens (check file) dependency. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon might stop.

Operator response

An internal error has occurred. If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ103E   An internal error has occurred. Jobmon cannot determine the status of the command used to determine the state of an opens (check file) dependency. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon might stop.

Operator response

An internal error has occurred. If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ104E   Error allocating storage local to thread !1:!2 error = !3 : !4.

AWSBIJ105E   An internal error has occurred. Jobmon cannot create the thread to read the output of the method that is used to resolve internetwork dependencies. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon might stop.

Operator response

An internal error has occurred. If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ106E   Error setting local thread value !1:!2 error = !3 : !4.

AWSBIJ107E   Error getting local thread value !1:!2 error = !3 : !4.

AWSBIJ108E   An internal error has occurred. Jobmon was unable to retrieve time information for the specified process. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds. The operation is not performed.

Operator response

Read the description of the internal system error and try to correct it. If you have corrected it, use the workstation stop and start commands to restart jobmon.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ109E   An internal error has occurred. Jobmon was unable to log a user on to the local computer. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds, but the job fails.

Operator response

Read the description of the internal system error and try to correct it. Verify that the HCL Workload Automation user has correct settings to log on the target computer. If you have corrected the error, use the workstation stop and start commands to restart jobmon.

The Reference Manual for information about user rights.

AWSBIJ110E   Error creating a mutex !1:!2 error = !3 : !4.

AWSBIJ111E   Error acquiring a mutex !1:!2 error = !3 : !4.

AWSBIJ112E   Error releasing a mutex !1:!2 error = !3 : !4.

AWSBIJ113E   An internal error has occurred. Jobmon cannot terminate the command that determines the state of an opens (check file) dependency. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

Jobmon attempts to terminate the command when the command has not completed within a fixed timeout interval.

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon might stop.

Operator response

An internal error has occurred. If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ114E   An internal error has occurred. Jobmon was unable to duplicate an object handle because an API window has failed. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon might stop. The operation is not performed.

Operator response

Read the description of the internal system error and try to correct it. If you have corrected it, use the workstation stop and start commands to restart jobmon.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ115E   An internal error has occurred. Jobmon was unable to create the event to communicate with the threads that monitor active jobs. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon might stop.

Operator response

An internal error has occurred. If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ116E   An internal error has occurred. Jobmon could not create the security descriptor to change the access permissions for the stdlist file. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon might stop.

Operator response

An internal error has occurred. If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ117E   An internal error has occurred. Jobmon was unable to create temporary files to redirect the stdin/stdout of the command that resolves opens (check file) dependencies. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon might stop.

Operator response

An internal error has occurred. If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ118E   An internal error has occurred. Jobmon was unable to get the default process environment to launch jobs. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon might stop.

Operator response

An internal error has occurred. If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ119E   An internal error has occurred. Jobmon encountered an error looking up a security identifier (SID) for the account and the name of the domain on which the account was found. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds. The operation is not performed.

Operator response

Read the description of the internal system error and try to correct it. If you have corrected it, use the workstation stop and start commands to restart jobmon.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ120E   An internal error has occurred. Jobmon was unable to obtain the name of the user associated with the current jobmon thread. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds. The operation is not performed.

Operator response

Read the description of the internal system error and try to correct it. If you have corrected it, use the workstation stop and start commands to restart jobmon.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ121E   An internal error has occurred. Jobmon was unable to get a user's Security Identifier (SID) to set the stream logon to that user. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon might stop.

Operator response

Read the description of the internal system error and try to correct it. In case of a domain user verify that the HCL Workload Automation user has the correct right to retrieve the SID from the domain controller. If you have corrected the error, use the workstation stop and start commands to restart jobmon.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ122E   An internal error has occurred. Jobmon was unable to validate a security identifier (SID). The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

The problem could be caused either because the revision number is not within a known range or the number of subauthorities is greater than the maximum.

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds. The operation is not performed.

Operator response

Read the description of the internal system error and try to correct it. If you have corrected it, use the workstation stop and start commands to restart jobmon.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ123E   An internal error has occurred. Jobmon was unable to initialize a security identifier (SID). The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds. The operation is not performed.

Operator response

Read the description of the internal system error and try to correct it. If you have corrected it, use the workstation stop and start commands to restart jobmon.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ124E   An internal error has occurred. Jobmon encountered an error because the Access Control List buffer size is too small for the information needed to be stored in it (the buffer size is hard-coded). The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds. The operation is not performed.

Operator response

An internal error has occurred. If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ125E   An internal error has occurred. Jobmon was unable to initialize a new Access Control List structure. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds. The operation is not performed.

Operator response

Read the description of the internal system error and try to correct it. If you have corrected it, use the workstation stop and start commands to restart jobmon.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ126E   An internal error has occurred. Jobmon was trying to access the stdlist file, but was unable to add an access-allowed access control entry to an access control list. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

An access control entry contains a set of access rights and a security identifier (SID).

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds. The operation is not performed.

Operator response

Read the description of the internal system error and try to correct it. If you have corrected it, use the workstation stop and start commands to restart jobmon.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ127E   An internal error has occurred. Jobmon was trying to access the stdlist file, but was unable to initialize a new security descriptor. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

A security descriptor is a structure and associated data that contains the security information for a securable object.

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds. The operation is not performed.

Operator response

Read the description of the internal system error and try to correct it. If you have corrected it, use the workstation stop and start commands to restart jobmon.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ128E   An internal error has occurred. Jobmon was trying to access the system desktop or the stdlist file, but was unable to set information in a discretionary access control list. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

The discretionary access control list is an access control list that is controlled by the owner of an object and that specifies the level of access particular users or groups can have to the object.

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds. The operation is not performed.

Operator response

Read the description of the internal system error and try to correct it. If you have corrected it, use the workstation stop and start commands to restart jobmon.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ129E   Error getting current process !1:!2 error = !3 : !4.

AWSBIJ130E   An internal error has occurred. Jobmon was unable to retrieve the handle for the window station associated with the calling process. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

A window station object is a secure object that contains a set of global atoms, a clipboard, and a set of desktop objects.

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds. The operation is not performed.

Operator response

Read the description of the internal system error and try to correct it. If you have corrected it, use the workstation stop and start commands to restart jobmon.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ131E   Error getting user object information !1:!2 error = !3 : !4.

AWSBIJ132E   An internal error has occurred. Jobmon was unable to retrieve the handle for the desktop associated with a specified thread. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds. The operation is not performed.

Operator response

Read the description of the internal system error and try to correct it. If you have corrected it, use the workstation stop and start commands to restart jobmon.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ133E   An internal error has occurred. Jobmon was unable to create a window station object. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

A window station object is a secure object that contains a set of global atoms, a clipboard, and a set of desktop objects.

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds. The operation is not performed.

Operator response

Read the description of the internal system error and try to correct it. If you have corrected it, use the workstation stop and start commands to restart jobmon.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ134E   An internal error has occurred. Jobmon was unable to assign a window station to the calling process. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

A window station object is a secure object that contains a set of global atoms, a clipboard, and a set of desktop objects.

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds. The operation is not performed.

Operator response

Read the description of the internal system error and try to correct it. If you have corrected it, use the workstation stop and start commands to restart jobmon.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ135E   An internal error has occurred. Jobmon was unable to retrieve the handle to an existing desktop object. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

A desktop object is a Windows object contained within a window station object, which itself is a secure object that contains a set of global atoms, a clipboard, and a set of desktop objects.

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds. The operation is not performed.

Operator response

Read the description of the internal system error and try to correct it. If you have corrected it, use the workstation stop and start commands to restart jobmon.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ136E   Error in validating heap !1:!2 error = !3 : !4.

AWSBIJ137E   An internal error has occurred. Jobmon was unable to allocate system memory for internal data structures. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon stops.

Operator response

Check the following:

  1. Verify if the workstation has enough memory available. Information about the memory requirements of HCL Workload Automation is provided in the Release Notes. If not, you may need to increase the memory of the workstation or make changes in memory management and paging to make more memory available to jobmon. Use the workstation stop and start commands to restart jobmon.
  2. If the workstation memory is adequate, try closing all the applications that you do not need, and then use the workstation stop and start commands to restart jobmon.
  3. If the problem persists, reboot the workstation, and then use the workstation start command to restart jobmon.
  4. If the problem persists, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.
The Release Notes for details of memory requirements.

AWSBIJ138E   Error in freeing heap memory !1:!2 error = !3 : !4.

AWSBIJ139E   An internal error has occurred. Jobmon was unable to create a new desktop on the window station associated with the calling process. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

A window station object is a secure object that contains a set of global atoms, a clipboard, and a set of desktop objects.

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds. The operation is not performed.

Operator response

Read the description of the internal system error and try to correct it. If you have corrected it, use the workstation stop and start commands to restart jobmon.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ140E   An internal error has occurred. Jobmon was unable to create the Windows process environment to launch jobs. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon stops.

Operator response

An internal error has occurred. If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ141E   Error in getting the domain controller name !1:!2 error = !3 : !4.

AWSBIJ142E   Error in getting the user information from system !1:!2 error = !3 : !4.

AWSBIJ143E   An internal error has occurred. Jobmon cannot open is own process token to set its process rights. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon might stop.

Operator response

An internal error has occurred. If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ144E   Error in setting user object information !1:!2 error = !3 : !4.

AWSBIJ145E   Error in getting any of the domain controllers name !1:!2 error = !3 : !4.

AWSBIJ146E   An internal error has occurred. Jobmon was unable to find the home directory of the user specified in the streamlogon field of the job. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds, but the job fails.

Operator response

Read the description of the internal system error and try to correct it. Verify that the user has a home directory associated and that the home directory exists on the machine. If you have corrected the error, use the workstation stop and start commands to restart jobmon.

AWSBIJ147E   An internal error has occurred. Jobmon was unable to retrieve a pointer to the discretionary access control list in a specified security descriptor. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds, but the job fails.

Operator response

Read the description of the internal system error and try to correct it. Verify that the HCL Workload Automation user has the correct rights to launch a job on the target computer. If you have corrected the error, use the workstation stop and start commands to restart jobmon.

The Reference Manual for details about user access.

AWSBIJ148E   One of the following internal errors has occurred:- Jobmon was unable to retrieve the handle of an existing window station- Jobmon was unable to retrieve the handle of the window station associated with the calling process- Jobmon was unable to assign a window station to the calling process.The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds. The operation is not performed.

Operator response

Read the description of the internal system error and try to correct it. If you have corrected it, use the workstation stop and start commands to restart jobmon.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ149E   An internal error has occurred. Jobmon was unable to retrieve the security information for the HCL Workload Automation user object. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds, but the job fails.

Operator response

Read the description of the internal system error and try to correct it. Verify that the HCL Workload Automation user has the correct rights to launch a job on the target computer. If you have corrected the error, use the workstation stop and start commands to restart jobmon.

The Reference Manual for details about user access.

AWSBIJ150E   An internal error has occurred. Jobmon encountered an error because the user specified in the streamlogon field of the job does not have the rights either to log on locally or to log on as batch. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds, but the job fails.

Operator response

Read the description of the internal system error and try to correct it. Verify that the HCL Workload Automation user has both of the indicated rights. If you have corrected the error, use the workstation stop and start commands to restart jobmon.

The Reference Manual for information about user rights.

AWSBIJ151E   Error granting user rights for job logon !1:!2 error = !3 : !4.

AWSBIJ152E   An internal error has occurred. Jobmon encountered an error checking that the user specified in the streamlogon field of the job has access to the interactive desktop. The error occurred in the following source code file: "file_name" at line: "line_number". The error message and error number are as follows: "error_message" : "error_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

error_message describes the operating system error.

error_number is the operating system error number.

System action

Jobmon proceeds, but the job fails.

Operator response

Read the description of the internal system error and try to correct it. Verify the rights of the streamlogon user. If the user does not have access, add it to the discretionary access control list for the interactive Windows Station WinSta0 and its default desktop. If you have corrected the error, use the workstation stop and start commands to restart jobmon.

AWSBIJ153E   An internal error has occurred. Jobmon was unable to retrieve time information for the specified process.

Explanation

See message.

System action

Jobmon proceeds. The operation is not performed.

Operator response

Read the description of the internal system error and try to correct it. If you have corrected it, use the workstation stop and start commands to restart jobmon.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ154E   An internal error has occurred. Jobmon was unable to get a user's Security Identifier (SID) to set the stream logon to that user.

Explanation

See message.

System action

Jobmon proceeds. The operation is not performed.

Operator response

Read the description of the internal system error and try to correct it. In case of a domain user verify that the HCL Workload Automation user has the correct right to retrieve the SID from the domain controller. If you have corrected the error, use the workstation stop and start commands to restart jobmon.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ201E   Incorrect usage. Correct usage is JOBMON pipehandle !1:!2

AWSBIJ203E   An internal error has occurred. Jobmon encountered an error while trying to adopt a child process. The error occurred in the following source code file: "file_name" at line: "line_number".

Explanation

Jobmon is trying to monitor processes that were active when jobmon exited.

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

System action

Jobmon stops.

Operator response

An internal error has occurred. If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ204W   An internal error has occurred. Jobmon has received a message from jobman that it is unable to interpret. The error occurred in the following source code file: "file_name" at line: "line_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

System action

Jobmon proceeds, but does not accept any more messages from jobman.

Operator response

An internal error has occurred. If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ205W   An internal error has occurred. Jobmon has received a message from jobman that has a non-valid version. The error occurred in the following source code file: "file_name" at line: "line_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

System action

Jobmon stops.

Operator response

An internal error has occurred. If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ206W   An internal error has occurred. Jobmon has received a message from jobman that contains a non-valid message type. The error occurred in the following source code file: "file_name" at line: "line_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

System action

Jobmon stops.

Operator response

An internal error has occurred. If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ207E   An internal error has occurred. Jobmon was unable to read the user information from the Symphony file. The error occurred in the following source code file: "file_name" at line: "line_number".

Explanation

file_name is the name of the file where the error occurred.

line_number is the line number in the file where the error occurred.

System action

Jobmon stops.

Operator response

An internal error has occurred. If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIJ208E   An internal error has occurred. Jobmon was unable to retrieve user information. The error occurred in the following source code file: "user_name" at line: "file_name".

Explanation

user_name is the name of the user for which jobmon was unable to retrieve the definition.

file_name contains the name of the file and the line number where the error occurred.

System action

The program proceeds.

Operator response

Verify that the user exists in the mozart directory.

Then verify the following items are correct:

  • The user name in the job definition.
  • The password entered in the HCL Workload Automation database.

If you have corrected the error, use the workstation stop and start commands to restart jobmon.

AWSBIJ209E   Unable to initialize the GSKit libraries.

AWSBIJ211E   An internal error has occurred. Jobmon could not find any existing or valid Windows sessions for user streamlogon that requires an interactive desktop.

Explanation

See message.

System action

Jobmon proceeds, but the job fails.

Operator response

Check that the selected user has existing or valid Windows sessions.